Materials
 |
 |
 |
Material specifications are typical and may differ depending on manufacturer. Specific specifications available upon request.
Powder Coated Baked Enamel on Steel
-
Galvanized and bondized steel sheets formed and bonded under pressure to a honeycomb core. Powder coating electrostatically applied and baked until cured.
-
1" thick doors and panels, 1-1/4" thick pilasters. 58" high doors and panels.
-
Very popular because of it's low cost.
-
Cost factor 1.0/1.0 = Powder Coated Baked Enamel.
Plastic Laminate
- Decorative laminate sheet bonded under high pressure and temperature to a particleboard core.
- 7/8" and/or 1" thick doors and panels, 1-1/4" thick pilasters.
- 58" high doors and panels.
- Combines large color choice with economical cost.
- Cost factor 1.10/1.0
Solid Phenolic Core
- Decorative laminate sheet bonded under pressure and temperature to a phenolic resin impregnated kraft paper core.
- Black or dark brown edges.
- Typically ½" thick panels, ¾" doors and pilasters.
- 58" high doors and panels.
- Provides large color selection with a core that is virtually impervious to moisture.
- Cost factor 2.30/1.0
Color Through Phenolic
- Virtually the same as solid phenolic core except that core material color matches the decorative laminate sheet.
- ½" thick panels, ¾" doors and pilasters.
- 58" high doors and panels.
- Limited color selection.
- Cost factor 2.30/1.0
HDPE Solid Plastic
- High-density polyethylene resins compounded under high pressure.
- Homogeneous color throughout.
- 1" thick doors, panels, and pilasters.
- 55" high doors and panels.
- Recommended for high traffic areas. Water and graffiti resistant.
- Cost factor 2.40/1.0
Solid Color Reinforced Composite
- As known as SCRC or by "Sierra", a trade mark name of Bobrick.
- Organic material reinforced with resins between clear melamine layers bonded together by heat and pressure.
- Homogeneous color throughout.
- ½" thick panels, ¾" thick doors and pilasters.
- 58" high doors and panels.
- Superior scratch and dent resistance.
- Repairable and non-ghosting graffiti removal.
- Limited color choices.
- Cost factor 2.50/1.0
Stainless Steel
- Same basic construction as powder coated baked enamel but with Type 304 stainless steel face sheets and edges.
- #4 satin finish typical. Texture finishes optional.
- Optional plywood core available.
- 1" thick doors and panels, 1-1/4" thick pilasters.
- 58" high doors and panels.
- Virtually indestructible and impervious to most susbstances.
- Light scratches are repairable.
- Cost factor 3.10/1.0
 |
|
 |